Single row angular contact ball bearings
Single-row The raceways of both the inner and outer rings of this bearing type are made with a set contact angle. Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction.Angular Contact Bearings feature raceways with high and low shoulders. These opposing raceways are designed to accommodate axial loads in one direction in addition to radial loads. Self-retaining units with solid inner and outer rings and ball and cage assemblies.
Single row angular contact ball bearings can accommodate axial loads in one direction only. This type of bearing is typically adjusted against a second bearing. Their bearing rings have an upper and a lower shoulder and are non-separable.Single-row Angular Contact ball bearings can sustain radial, axial or composite loads, however, any axial load must be in one direction. This bearing type is generally used in pairs to handle the induced load resulting from the internal axial force generated by the applied radial load.
- 25 mm x 52 mm x 15 mm skf 7205 BECBP Single row angular contact ball bearings
- 31171511
- 8.8 Inch | 223 Milli
- 90 mm x 160 mm x 30 mm skf 7218 BEGAY Single row angular contact ball bearings
- 1 Piece Solid
- Pillow Block
- 320 mm x 480 mm x 74 mm skf 7064 BGM Single row angular contact ball bearings
- 0.0
- 15.875x28.575x25.4
- 80 mm x 170 mm x 39 mm skf 7316 BECBP Single row angular contact ball bearings
- 18,3 mm
- KSR16-L0-06-10-20-08